Megasquirt Values

   These megasquirt values are what my car currently runs.  Right now I'm using MSnS-Extra v025v firmware and Megatune 2.25b674.  I would recommend using the latest Megatune2.25 from http://www.msefi.com download section, and run v029 firmware.  However, if you want to copy some of my values, that is fine, just be aware that anything that the value is in ms (milliseconds) will be significanly different unless you have 80lb/hr injectors.  Anything with percentages (%) will be relatively close.  And remember that my engine is 2.8l not 2.5, so a my torque curve may be a bit different, and you may need to lean out or richen some spots in the VE map.

   Before you copy these and plug them into your own map, please read my introduction to Megasquirt, it will explain terms that you may need to know to do it correctly.